PANDUIT: Electrical Full Line

Chemical Resistance Physical Properties Ratings and Approvals Polyethylene Terephthalate (PET) This material is a thermoplastic polyester material designed for indoor applications.It is rated for use up to 257°F and will tolerate short-term exposure up to 446°F. Colors: Black, White and Gray. -94°F (-70°C) to 257°F (125°C) HB 500°F (260°C) — 1.39 100,000 (D876) 0.08% Resistant to some solvents Resistant to most weak bases Resistant Some Discoloration Flame Retardant Polyethylene * Terephthalate (PET) This material is a self-extinguishing thermoplastic polyester that can be used indoors. It is also rated for use up to 257°F and will tolerate short term exposure up to 446°F. It is provided with tracers to identify the flame retardant material. -94°F (-70°C) to 257°F (125°C) UL 1441 VW–1 469°F (243°C) — 1.39 39,295 (D876) 0.08% Resistant to some solvents Resistant to most weak bases Resistant Resistant Some Discoloration Black Polypropylene Lowest cost material is for use up to 122°F. Other colors may be available. -40°F (-40°C) to 122°F(50°C) HB — — 0.926 – 0.940 1500 (D638) — Resistant except to halogenated hydrocarbons Resistant Resistant Resistant No Discoloration Nylon 6 Nylon is a strong, impact modified, heat stabilized, durable high abrasion resistant material. -40°F (-40°C) to 230°F (110°C) HB 410°F (211°C) — 1.06 – 1.16 8000 (D638) — Resistant except to halogenated hydrocarbons Resistant Not recommended Resistant No Discoloration PVC Non-Shrink Tubing* This material provides insulation and protection for continuous use at temperature -4°F (-20°C) to 221°F(105°C). -4°F (-20°C) to 221°F (105°C) UL 224 VW-1 — — 1.35 2500 (D876) — Resistant except to aromatic hydrocarbons, ketones and esters Resistant Resistant Resistant No Discoloration Black Polyethylene Lowest cost material is for use up to 122°F. Other colors may be available. -40°F (-40°C) to 122°F (50°C) UL94 HB — — 1.04 3,900 (D638) 0.02 – 0.03% Resistant except to halogenated hydrocarbons Resistant Resistant except to oxidizing acids Resistant Some Discoloration Natural Polyethylene Lowest cost material for indoor use up to 122° F. Natural is available in all sizes. -40°F (-40°C) to 122°F (50°C) HB 239°F (115°C) 22 mg 0.91 – 1.09 1400 (D638) — Resistant below 140°F (60°C) except to chlorinated solvents Resistant Resistant except to oxidizing acids Some Discoloration Weather Resistant Polyethylene This material has the same properties as natural polyethylene, and also has additives which allow it to resist the effects of ultraviolet light and acid rain in an outdoor environment. This product is available in black only. -40°F (-40°C) to 122°F (50°C) HB 239°F (115°C) 20 mg 0.93 – 1.09 2000 (D638) 0.03% Resistant below 140°F (60°C) except to chlorinated solvents Resistant Resistant except to oxidizing acids No Discoloration Flame Retardant Polyethylene * UL94-V-0 Rating This material is self-extinguishing and passes the UL94 flame retardant test with a V-0 rating. -4°F (-20°C) to 167°F (75°C) V–0 270°F (132°C) 22 mg 1.23 – 1.37 1200 0.02% Resistant below 194°F (90°C) except to chlorinated solvents Resistant Resistant except to oxidizing acids Some Discoloration Nylon Nylon is strong, durable, self-extinguishing material for indoor use up to 149°F. It offers a combination of lightweight, wide temperature range, and high abrasion resistance. This material is suitable for applications where heavy vibration or stress exists on the wiring or tubing. -40°F (-40°C) to 149°F (65°C) V–2 491°F (255°C) 7 mg 1.03 – 1.15 12,400 (D638) 1.5% Resistant except to phenols and formic acid Resistant Resistant to most weak acids No Discoloration For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory) ELECTRICAL SOLUTIONS C3.21 B2. Cable Accessories C1. Wiring Duct C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers F. Index B3. Stainless Steel Ties C2. Surface Raceway E5. Lockout/ Tagout & Safety Solutions B1. Cable Ties A. System Overview D3. Grounding Connectors E4. Permanent Identification Note: Typical operating temperature ranges are extended based on end use application and specific environment tests. *Contains halogens. Other materials are halogen free. UL Temperature Index Flammability (UL 94) Melting Temperature Abrasion Resistance (Lower number is better) Specific Gravity (D792) Minimum Tensile @23°C (psi) Water Absorption (Max. 24 hrs.) Organic Solvents Alkalies Acids Petro-Chemicals GROMMET EDGING PVC CLT FITTINGS CLT SLEEVING Abrasion Protection Materials Technical Data (continued)