PANDUIT: Electrical Full Line

ELECTRICAL SOLUTIONS Order number of pieces required, in multiples of Standard Package Quantity. C3.44 B2. Cable Accessories C1. Wiring Duct C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers F. Index B3. Stainless Steel Ties C2. Surface Raceway E5. Lockout/ Tagout & Safety Solutions B1. Cable Ties A. System Overview D3. Grounding Connectors E4. Permanent Identification Dry-Shrink ™ , Damp-Shrink ™ , and Wet-Shrink ™ Heat Shrink Tubing Technical Data General Information Product Type Typical Applications Specific Gravity Flammability Water Absorption Dielectric Strength HSTT Economical and easy way to insulate, protect, harness and identify electrical and electronic components in a wide variety of applications. Black is U.V. Resistant. Suitable for use in dry locations. Class 1, 1.35 Class 2, 1.0 ASTM D792 Class 1 Self Extinguishing ASTM D2671 Procedure B .5% MAX. ASTM D570 500 V/MIL. (19.7 Kv/mm) min. ASTM D2671 HSTTV Use where UL recognition with VW-1 rating is required. Use where the wire component cannot tolerate higher shrink temperatures, reduces application time to insulate, protect, identify, etc. Black is U.V. Resistant. Suitable for use in dry locations. 1.50 ASTM D792 VW-1 per UL 224 .5% MAX. ASTM D570 500 V/MIL. (19.7 Kv/mm) min. ASTM D2671 HSTTP Ripple free conformance around sharp bends as in appliance handles and bus bars. Good cut through and solder-iron resistance. Black is U.V. Resistant. Suitable for use in dry locations. 1.35 MAX. VW-1 per UL 224 1.0% MAX. ASTM D570 400 V/MIL. (15.8 Kv/mm) min. ASTM D2671 HSTTPN Crystal clear product that is excellent for protecting wire and cable markers and continuous inspection of splices. Suitable for use in dry locations. N/A VW-1 per UL 224 1.0% MAX. ASTM D570 400 V/MIL. (15.8 Kv/mm) min. ASTM D2671 HSTTN Insulation and abrasion resistance, extensive military uses on vehicles and ship-board. Excellent chemical resistance especially to fuels and oils. Black is U.V. Resistant. Suitable for use in dry locations. 1.30 ASTM D792 Self Extinguishing ASTM D876 1.0% MAX. ASTM D570 300 V/MIL. (11.8 Kv/mm) min. ASTM D2671 HSTTT High insulation and abrasion resistance. High temperature, strain relief, resists corrosive atmosphere, self lubrication and non-wetting. Can be used with fiber optics and as a strain relief for high density connectors. U.V. Resistant. Suitable for use in dry locations. 2.2 MAX. ASTM D792 VW-1 per UL 224 .01% MAX. ASTM D570 800 V/MIL. (31.5 Kv/mm) min. ASTM D2671 HSTTK Protection and strain relief for wires or connectors in a high temperature or solvent rich environment. Insulation of heater leads. Suitable for use in dry locations. 1.8 MAX. ASTM D792 VW-1 per UL 224 .5% MAX. ASTM D570 Size to (12.7mm) 800 V/MIL. (31.5 Kv/mm) min Over (12.7mm) 600 V/MIL. (23.6 Kv/mm) min ASTM D2671 HSTTVA Seals and protects components from moisture and corrosion. Use where a flexible tubing is needed. Suitable for damp locations. N/A Self Extinguishing ASTM D2671 Procedure B .5% MAX. ASTM D570 500 V/MIL. (19.7 Kv/mm) min. ASTM D2671 HSTTA Environmentally seals and protects components. The 3:1 shrink ratio is a benefit when working with connector to cable transitions. Suitable for damp locations. N/A Self Extinguishing ASTM D2671 Procedure B 1.0% MAX. ASTM D570 300 V/MIL. (11.8 Kv/mm) min. ASTM D2671 HSTT4A Seals and protects components from moisture and corrosion. The 4:1 shrink ratio is a benefit when working with large transitions. Use where a flexible tubing is needed. Suitable for damp locations. N/A VW-1 per UL 224 1.0% MAX. ASTM D570 500 V/MIL. (19.7 Kv/mm) min. ASTM D2671 HSTTRA Environmentally seals and protects components forming a rugged and heavy duty covering. The 2.5:1 shrink ratio is a benefit when working with connector to cable transitions. Suitable for damp locations. N/A N/A .5% MAX. ASTM D570 500 V/MIL. (19.7 Kv/mm) min. ASTM D2671 HST Seals and protects electrical connections and splices above or below ground, 3:1 shrink ratio. Suitable for outdoor and wet locations. 1.2 MAX. VW-1 per UL 224 .5% MAX. ASTM D570 200 V/MIL. (7.9 Kv/mm) min. ASTM D2671